LDO PEI Spring Steel Flex Plate

The LDO PEI Spring Steel Sheet combines a textured PEI surface for dependable adhesion with a smooth PEI surface for a cleaner bottom finish. Built on a flexible spring steel core, it makes part removal quick and easy once the print cools. Whether you print functional parts every day or want a more refined bottom surface for display pieces, this dual-surface plate gives you the flexibility to choose what works best for the job.

Highlights

• Dual-surface design - textured PEI on one side, smooth PEI on the other
• Flexible spring steel core - remove finished prints with a simple bend after cooling
• Magnetic mounting - installs and swaps easily on compatible magnetic beds
• Versatile for everyday printing - choose the surface based on material, model type, and finish preference

Check Your Bed Size Before OrderingRequirements

Choose the size that matches your printer’s heated bed for the best fit and performance.
Important Note

This product is the spring steel sheet only for some variants. If your printer does not already have a magnetic base installed, a magnetic sheet may be required separately.

Best performance starts with a clean surface.

Before First Use

• Wash the plate with warm water and mild dish soap
• Dry completely before printing
• Recalibrate Z offset / mesh bed leveling after installation
• Start with a simple first-layer test print to confirm setup

Routine Cleaning

• Use IPA for regular wipe-downs and degreasing
• For deeper cleaning, wash with warm water and dish soap
• Keep the surface free of skin oils, dust, and filament residue

Print Removal

• Allow the plate to cool before removing the part
• Flex the sheet gently to release the print
• Avoid excessive scraping or aggressive prying whenever possible

Care Notes

• Do not over-squish the first layer, as too much nozzle pressure may shorten surface life
• Store the plate away from sharp tools or abrasive contact
• Handle carefully to keep the coating in good condition

FAQ

1. Does this plate come with a magnetic sheet?

A: It depends on the variant you choose. This product is a spring steel flex plate—some versions include a magnetic sheet, some don't. If your bed isn't magnetic, you'll need to get a magnetic sheet or base separately.

2. Do I need to readjust Z offset?

A: Yes. Whenever you swap plates or flip to the other side, it's a good idea to recheck your Z-offset and/or re-run bed leveling (mesh). That little step makes a big difference for first-layer consistency.

3. Will the textured finish affect print quality?

A: Nope—it only affects the bottom surface texture. The top layers and print quality of your model won't be impacted. In fact, the textured surface often improves first-layer reliability.

4. PETG is sticking too hard—what should I do?

A: Try a thin layer of glue stick as a release barrier, reduce your first-layer squish a bit, or lower the bed temperature slightly. Any of these should make removal noticeably easier.

5. What’s the best way to clean it?

A: For daily upkeep, wipe with IPA to remove fingerprints and residue. If adhesion starts to drop, give it a deep clean with warm water and dish soap—that usually brings it right back.